Original file

Citroën Berlingo Bosch MD1CS003 9693396480 / 10SW042441

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Citroën Berlingo, hardware number 9693396480 and software number 10SW042441, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Berlingo1.5 diesel 102PS
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9693396480
Software number
10SW042441
Software / calibration
62R2X_P5B8B_6A3O1_9693396480

Technical data

Vehicle
BrandCitroën
Car modelBerlingo
Engine1.5 diesel 102PS
Power102.0PS / 75.0kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9693396480
Software number10SW042441
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya4a75be672dd3032
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW042441Offset in the file: 0x000144
Vehicle maker's hardware number9693396480Offset in the file: 0x000257
Software / calibration62R2X_P5B8B_6A3O1_9693396480Offset in the file: 0x000228
Bosch project identifier (EPK)59/1/MD1CS003/014/1396//C48b/62R2X_P5B8B_6A3O1_9693396480//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9693396480 and software number 10SW042441. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
9693394780041437Peugeot Partner
969339478010SW041437Peugeot Partner
969339478010SW042443Citroën Berlingo
969339528010SW040721Citroën C3
969339678010SW041437Citroën C3
9693396880043500Peugeot 308 SHIFTECH MAPKE
969339708010SW041437Citroën Elysée, Citroën 308, Peugeot
969339718010SW041437Peugeot 208 06 2015 ), Peugeot 208, Peugeot 2008

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page