Original file

Citroën C3 Bosch MD1CS003 9693396780 / 10SW041437

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Citroën C3, hardware number 9693396780 and software number 10SW041437, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën C31.5 diesel 100PS
Control unit
Bosch MD1CS003
File size
8,192.00 KB
Contents
Flash
Hardware number
9693396780
Software number
10SW041437
Software / calibration
P1396_PSA_MD1CS003_IFXD4_C48B

Technical data

Vehicle
BrandCitroën
Car modelC3
Engine1.5 diesel 100PS
Power100.0PS / 73.5kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9693396780
Software number10SW041437
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyed02c434f6e70c20
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW041437Offset in the file: 0x000164
Vehicle maker's hardware number9693396780Offset in the file: 0x600257
Software / calibrationP1396_PSA_MD1CS003_IFXD4_C48BOffset in the file: 0x21F3A8
Bosch project identifier (EPK)58/1/MD1CS003/1396/P1396//P1396_PSA_MD1CS003_IFXD4_C48B///Offset in the file: 0x21F3A8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9693396780 and software number 10SW041437. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
969339478010SW041437Peugeot Partner
969339478010SW042443Citroën Berlingo
969339528010SW040721Citroën C3
969339648010SW042441Citroën Berlingo
9693396880043500Peugeot 308 SHIFTECH MAPKE
969339708010SW041437Citroën Elysée, Citroën 308, Peugeot
969339718010SW041437Peugeot 208 06 2015 ), Peugeot 208, Peugeot 2008
96933972802227773333Peugeot 3008

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page