Original file

Peugeot 308 SHIFTECH MAPKE Bosch MD1CS003 9693396880 / 043500

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Peugeot 308 SHIFTECH MAPKE, hardware number 9693396880 and software number 043500, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 308 SHIFTECH MAPKE1.5 · 100.0PS / 73.5kW
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9693396880
Software number
043500
Bosch part / software
10SW043500
Software / calibration
62R2X_1KH8B_5A3O1_9693396880

Technical data

Vehicle
BrandPeugeot
Car model308 SHIFTECH MAPKE
Engine1.5
FuelDiesel
Power100.0PS / 73.5kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9693396880
Software number043500
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyada30a52e960f402
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW043500Offset in the file: 0x000144
Vehicle maker's hardware number9693396880Offset in the file: 0x000257
Software / calibration62R2X_1KH8B_5A3O1_9693396880Offset in the file: 0x000228
Bosch project identifier (EPK)59/1/MD1CS003/014/1396//C48b/62R2X_1KH8B_5A3O1_9693396880//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9693396880 and software number 043500. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
969339478010SW042443Citroën Berlingo
969339528010SW040721Citroën C3
969339648010SW042441Citroën Berlingo
969339678010SW041437Citroën C3
969339708010SW041437Citroën Elysée, Citroën 308, Peugeot
969339718010SW041437Peugeot 208 06 2015 ), Peugeot 208, Peugeot 2008
96933972802227773333Peugeot 3008
969339738010SW042444Peugeot 308

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page