Original file

Citroën Berlingo SHIFTECH MAPKE Bosch MD1CS003 9693538380 / 046677

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Citroën Berlingo SHIFTECH MAPKE, hardware number 9693538380 and software number 046677, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Berlingo SHIFTECH MAPKE1.5 100PS
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9693538380
Software number
046677
Bosch part / software
10SW046677
Software / calibration
62R2X_1LB8B_6A3O11_9693538380

Technical data

Vehicle
BrandCitroën
Car modelBerlingo SHIFTECH MAPKE
Engine1.5 100PS
FuelDiesel
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9693538380
Software number046677
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyaebbe6488f0c3c7d
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW046677Offset in the file: 0x000144
Vehicle maker's hardware number9693538380Offset in the file: 0x000258
Software / calibration62R2X_1LB8B_6A3O11_9693538380Offset in the file: 0x000228
Bosch project identifier (EPK)60/1/MD1CS003/014/1396//C48b/62R2X_1LB8B_6A3O11_9693538380//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9693538380 and software number 046677. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
96934532802227770000Peugeot Partner
96935380802227773333Peugeot 508, Peugeot Partner
96935381802227773333Peugeot 3008, Peugeot Rifter SHIFTECH, Peugeot Rifter
96935382802227773333Peugeot Partner
969353838010SW041437Citroën C3, Citroën 208, Peugeot
969353838010SW046677Citroën C3
969353848010SW046672Peugeot 2008
96935619802227770000Citroën C5

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page