Original file

Opel Vivaro 2019y MD1CS003 Bosch MD1CS003 9693680480 / 10SW041331

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Opel Vivaro 2019y MD1CS003, hardware number 9693680480 and software number 10SW041331, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Vivaro 2019y MD1CS0031.5 diesel
Control unit
Bosch MD1CS003
File size
8,192.00 KB
Contents
Flash
Hardware number
9693680480
Software number
10SW041331
Software / calibration
P1396_PSA_MD1CS003_IFXD4_C66

Technical data

Vehicle
BrandOpel
Car modelVivaro 2019y MD1CS003
Engine1.5 diesel
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9693680480
Software number10SW041331
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
From the file nameOpel Vivaro 2019y 1.5 CDTI
File keyc51d24893515f538
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW041331Offset in the file: 0x010144
Vehicle maker's hardware number9693680480Offset in the file: 0x600256
Software / calibrationP1396_PSA_MD1CS003_IFXD4_C66Offset in the file: 0x220128
Bosch project identifier (EPK)57/1/MD1CS003/1396/P1396//P1396_PSA_MD1CS003_IFXD4_C66///Offset in the file: 0x220128

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9693680480 and software number 10SW041331. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
969367908010SW049197Peugeot 308
96936792802227770000Citroën C5
96936796802227770000Peugeot Expert, Peugeot Jumpy, Citroën
96936803802227770000Citroën Jumpy, Citroën Expert, Peugeot
96936804802227770000Peugeot Expert, Peugeot Berlingo, Citroën
969368128010SW041437Peugeot Rifter, Peugeot Berlingo, Citroën
969368128010SW048498Peugeot Rifter
9693681780048502Peugeot Rifter

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page