Original file

Peugeot Rifter Bosch MD1CS003 9693681280 / 10SW048498

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Peugeot Rifter, hardware number 9693681280 and software number 10SW048498, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot Rifter1.5 diesel 100PS
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9693681280
Software number
10SW048498
Software / calibration
62R2X_P2E8B_6A3O4_9693681280

Technical data

Vehicle
BrandPeugeot
Car modelRifter
Engine1.5 diesel 100PS
Power100.0PS / 73.5kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9693681280
Software number10SW048498
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7dd41442291c7de7
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW048498Offset in the file: 0x000144
Vehicle maker's hardware number9693681280Offset in the file: 0x000257
Software / calibration62R2X_P2E8B_6A3O4_9693681280Offset in the file: 0x000228
Bosch project identifier (EPK)59/1/MD1CS003/014/1396//C48b/62R2X_P2E8B_6A3O4_9693681280//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9693681280 and software number 10SW048498. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
96936803802227770000Citroën Jumpy, Citroën Expert, Peugeot
969368048010SW041331Opel Vivaro 2019y MD1CS003
96936804802227770000Peugeot Expert, Peugeot Berlingo, Citroën
969368128010SW041437Peugeot Rifter, Peugeot Berlingo, Citroën
9693681780048502Peugeot Rifter
969368178010SW041437Citroën Berlingo, Citroën Rifter, Citroën Berlingo 2019y MD1CS003
96936818802227770000Peugeot Rifter, Peugeot C4, Peugeot 3008
9693681980041437Peugeot Expert

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page