Original file

Citroën Berlingo Bosch MD1CS003 9694021980 / 10SW063822

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Citroën Berlingo, hardware number 9694021980 and software number 10SW063822, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Berlingo1.5 diesel 100PS
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9694021980
Software number
10SW063822
Software / calibration
62R2X_P5E8B_6A3O7_9694021980

Technical data

Vehicle
BrandCitroën
Car modelBerlingo
Engine1.5 diesel 100PS
Power100PS / 73.5kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9694021980
Software number10SW063822
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd3655b79dd77ae32
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW063822Offset in the file: 0x000144
Vehicle maker's hardware number9694021980Offset in the file: 0x000257
Software / calibration62R2X_P5E8B_6A3O7_9694021980Offset in the file: 0x000228
Bosch project identifier (EPK)59/1/MD1CS003/014/1396//C48b/62R2X_P5E8B_6A3O7_9694021980//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9694021980 and software number 10SW063822. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
96937233802227773333Citroën C5
96937234802227773333Peugeot 508
96937235802227773333Citroën DS7
96937237802227773333Peugeot 5008, Peugeot 3008, Peugeot Rifter
969402388010SW057028Citroën Berlingo
9694024780056877Citroën Berlingo
969402478010SW056877Peugeot OleDropDrop Peugeot Partner
96940725802227773333Peugeot 5008

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page