Original file

Citroën Berlingo MD1CS003 Bosch MD1CS003 9694176080 / 10SW057730

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Citroën Berlingo MD1CS003, hardware number 9694176080 and software number 10SW057730, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Berlingo MD1CS003
Control unit
Bosch MD1CS003
File size
8,192.00 KB
Contents
Flash
Hardware number
9694176080
Software number
10SW057730
Bosch part / software
10SW041437
Software / calibration
P1396_PSA_MD1CS003_IFXD4_C48B

Technical data

Vehicle
BrandCitroën
Car modelBerlingo MD1CS003
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9694176080
Software number10SW057730
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
From the file nameCitroen Berlingo MD1CS003
File key96fdb979d0563cb4
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW041437Offset in the file: 0x010144
Vehicle maker's hardware number9694176080Offset in the file: 0x600257
Software / calibrationP1396_PSA_MD1CS003_IFXD4_C48BOffset in the file: 0x21F3A8
Bosch project identifier (EPK)58/1/MD1CS003/1396/P1396//P1396_PSA_MD1CS003_IFXD4_C48B///Offset in the file: 0x21F3A8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9694176080 and software number 10SW057730. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
96941754802227773333Citroën Berlingo, Citroën Partner, Peugeot
96941757802227773333Peugeot Rifter, Peugeot Berlingo, Citroën
96941758802227773333Peugeot Partner, Peugeot Berlingo, Citroën
96941759802227770000Peugeot Partner
96941762802227773333Citroën C5 Aircross
9694179180057793Citroën Berlingo
969417918010SW041437Citroën Berlingo, Peugeot
969417918010SW057793Peugeot Partner

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page