Original file

Citroën Berlingo Bosch MD1CS003 9694179180 / 057793

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Citroën Berlingo, hardware number 9694179180 and software number 057793, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Berlingo1.5 · 75.0PS / 55.2kW
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9694179180
Software number
057793
Bosch part / software
10SW057793
Software / calibration
62S2X_P5B8B_7A3O5_9694179180

Technical data

Vehicle
BrandCitroën
Car modelBerlingo
Engine1.5
FuelDiesel
Power75.0PS / 55.2kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9694179180
Software number057793
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key772dcc782c52e895
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW057793Offset in the file: 0x000144
Vehicle maker's hardware number9694179180Offset in the file: 0x000257
Software / calibration62S2X_P5B8B_7A3O5_9694179180Offset in the file: 0x000228
Bosch project identifier (EPK)59/1/MD1CS003/014/1396//C48b/62S2X_P5B8B_7A3O5_9694179180//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9694179180 and software number 057793. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
96941758802227773333Peugeot Partner, Peugeot Berlingo, Citroën
96941759802227770000Peugeot Partner
969417608010SW057730Citroën Berlingo MD1CS003
96941762802227773333Citroën C5 Aircross
969417918010SW041437Citroën Berlingo, Peugeot
969417918010SW057793Peugeot Partner
969418138010SW041437Peugeot 308
96941881802227770000Citroën Berlingo, Citroën C3, Citroën Partner

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page