Original file

Peugeot Rifter Bosch MD1CS003 9694332580 / 041437

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Peugeot Rifter, hardware number 9694332580 and software number 041437, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot Rifter1.5 35HP
Control unit
Bosch MD1CS003
File size
8,192.00 KB
Contents
Flash
Hardware number
9694332580
Software number
041437
Bosch part / software
10SW041437
Software / calibration
62R2X_P2B8B_7A3OB_9694332580

Technical data

Vehicle
BrandPeugeot
Car modelRifter
Engine1.5 35HP
FuelDiesel
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9694332580
Software number041437
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key9deb19acc76617fb
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW041437Offset in the file: 0x200144
Vehicle maker's hardware number9694332580Offset in the file: 0x600257
Software / calibration62R2X_P2B8B_7A3OB_9694332580Offset in the file: 0x600228
Bosch project identifier (EPK)59/1/MD1CS003/014/1396//C48b/62R2X_P2B8B_7A3OB_9694332580//Offset in the file: 0x600228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9694332580 and software number 041437. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
969432408010SW041437Citroën C3
969432408010SW060688Peugeot C3, Peugeot 208, Peugeot 5008
96943244802227773333Citroën Berlingo
96943279802227773333Peugeot 2008, Peugeot 5008
9694332580061382Peugeot Rifter
969433258010SW041437Citroën Berlingo
969433258010SW061382Citroën Berlingo
96943327802227770000Citroën Berlingo

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page