Original file

Peugeot 308 Bosch MD1CS003 9694360580 / 062191

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Peugeot 308, hardware number 9694360580 and software number 062191, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 3081.5 100PS
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9694360580
Software number
062191
Bosch part / software
10SW062191
Software / calibration
62R2X_POH8B_6A3O4_9694360580

Technical data

Vehicle
BrandPeugeot
Car model308
Engine1.5 100PS
FuelDiesel
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9694360580
Software number062191
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyeb26f0b423f0586d
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW062191Offset in the file: 0x000144
Vehicle maker's hardware number9694360580Offset in the file: 0x000257
Software / calibration62R2X_POH8B_6A3O4_9694360580Offset in the file: 0x000228
Bosch project identifier (EPK)59/1/MD1CS003/014/1396//C48b/62R2X_POH8B_6A3O4_9694360580//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9694360580 and software number 062191. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
969433258010SW041437Citroën Berlingo
969433258010SW061382Citroën Berlingo
96943327802227770000Citroën Berlingo
96943569802227773333Citroën C5
96943622802227773333Peugeot 308
969436348010SW046454Peugeot 208
969436348010SW062552Peugeot 208, Peugeot Berlingo, Citroën
96943919802227773333Peugeot Partner, Peugeot Berlingo, Citroën

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page