Original file

Citroën Berlingo 1.5 HDI Bosch MD1CS003 9694392380 / 9694392380

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Citroën Berlingo 1.5 HDI, hardware number 9694392380 and software number 9694392380, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Berlingo 1.5 HDI1.5 diesel 102.0PS / 75.0kW
Control unit
Bosch MD1CS003
File size
8,192.00 KB
Contents
Flash
Hardware number
9694392380
Software number
9694392380
Bosch part / software
10SW041437
Software / calibration
P1396_PSA_MD1CS003_IFXD4_C48B

Technical data

Vehicle
BrandCitroën
Car modelBerlingo 1.5 HDI
Engine1.5 diesel 102.0PS / 75.0kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9694392380
Software number9694392380
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key87156dfcbd66c18f
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW041437Offset in the file: 0x01C144
Vehicle maker's hardware number9694392380Offset in the file: 0x600257
Software / calibrationP1396_PSA_MD1CS003_IFXD4_C48BOffset in the file: 0x21F3A8
Bosch project identifier (EPK)58/1/MD1CS003/1396/P1396//P1396_PSA_MD1CS003_IFXD4_C48B///Offset in the file: 0x21F3A8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9694392380 and software number 9694392380. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
96943919802227773333Peugeot Partner, Peugeot Berlingo, Citroën
96943921802227770000Peugeot Partner
969439238010SW041437Citroën Berlingo, Citroën Partner, Peugeot
969439238010SW062963Citroën Berlingo
9694392480062964Peugeot Partner
969439248010SW041437Peugeot Partner, Peugeot Berlingo, Citroën
969439248010SW062964Citroën Berlingo
969439908010SW066129Peugeot 208

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page