Original file

Citroën Berlingo Bosch MD1CS003 9694392480 / 10SW062964

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Citroën Berlingo, hardware number 9694392480 and software number 10SW062964, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Berlingo1.5 diesel 75PS
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9694392480
Software number
10SW062964
Software / calibration
62S2X_P5B8B_7A3O6_9694392480

Technical data

Vehicle
BrandCitroën
Car modelBerlingo
Engine1.5 diesel 75PS
Power75.0PS / 55.2kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9694392480
Software number10SW062964
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya8254e1c25149604
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW062964Offset in the file: 0x000144
Vehicle maker's hardware number9694392480Offset in the file: 0x000257
Software / calibration62S2X_P5B8B_7A3O6_9694392480Offset in the file: 0x000228
Bosch project identifier (EPK)59/1/MD1CS003/014/1396//C48b/62S2X_P5B8B_7A3O6_9694392480//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9694392480 and software number 10SW062964. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
969439238010SW062963Citroën Berlingo
96943923809694392380Citroën Berlingo 1.5 HDI
9694392480062964Peugeot Partner
969439248010SW041437Peugeot Partner, Peugeot Berlingo, Citroën
969439908010SW066129Peugeot 208
9694410280066337Citroën Berlingo SHIFTECH MAPKE
969441028010SW066337Citroën Berlingo, Citroën Elysée
96944233802227773333Citroën C5

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page