Original file

Peugeot 208 Bosch MD1CS003 9694399080 / 10SW066129

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Peugeot 208, hardware number 9694399080 and software number 10SW066129, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 2081.5 diesel
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9694399080
Software number
10SW066129
Software / calibration
62R2X_1LH8B_5A3O4_9694399080

Technical data

Vehicle
BrandPeugeot
Car model208
Engine1.5 diesel
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9694399080
Software number10SW066129
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key55e75ab380800ec8
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW066129Offset in the file: 0x000144
Vehicle maker's hardware number9694399080Offset in the file: 0x000257
Software / calibration62R2X_1LH8B_5A3O4_9694399080Offset in the file: 0x000228
Bosch project identifier (EPK)59/1/MD1CS003/014/1396//C48b/62R2X_1LH8B_5A3O4_9694399080//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9694399080 and software number 10SW066129. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
96943923809694392380Citroën Berlingo 1.5 HDI
9694392480062964Peugeot Partner
969439248010SW041437Peugeot Partner, Peugeot Berlingo, Citroën
969439248010SW062964Citroën Berlingo
9694410280066337Citroën Berlingo SHIFTECH MAPKE
969441028010SW066337Citroën Berlingo, Citroën Elysée
96944233802227773333Citroën C5
96944246802227773333Peugeot 3008

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page