Original file

Citroën Berlingo SHIFTECH MAPKE Bosch MD1CS003 9694410280 / 066337

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Citroën Berlingo SHIFTECH MAPKE, hardware number 9694410280 and software number 066337, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Berlingo SHIFTECH MAPKE1.5 100PS
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9694410280
Software number
066337
Bosch part / software
10SW066337
Software / calibration
62R2X_P2E8B_6A3OA_9694410280

Technical data

Vehicle
BrandCitroën
Car modelBerlingo SHIFTECH MAPKE
Engine1.5 100PS
FuelDiesel
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9694410280
Software number066337
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key64ef76bc1d03f720
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW066337Offset in the file: 0x000144
Vehicle maker's hardware number9694410280Offset in the file: 0x000257
Software / calibration62R2X_P2E8B_6A3OA_9694410280Offset in the file: 0x000228
Bosch project identifier (EPK)59/1/MD1CS003/014/1396//C48b/62R2X_P2E8B_6A3OA_9694410280//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9694410280 and software number 066337. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
9694392480062964Peugeot Partner
969439248010SW041437Peugeot Partner, Peugeot Berlingo, Citroën
969439248010SW062964Citroën Berlingo
969439908010SW066129Peugeot 208
969441028010SW066337Citroën Berlingo, Citroën Elysée
96944233802227773333Citroën C5
96944246802227773333Peugeot 3008
96944790801037562490Citroën DS4

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page