Original file

Citroën Berlingo Bosch MD1CS003 9695018480 / 10SW046454

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Citroën Berlingo, hardware number 9695018480 and software number 10SW046454, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Berlingo1.5 diesel 76PS
Control unit
Bosch MD1CS003
File size
8,192.00 KB
Contents
Flash
Hardware number
9695018480
Software number
10SW046454
Software / calibration
62S2I_P5B8B_7A3OC_9695018480

Technical data

Vehicle
BrandCitroën
Car modelBerlingo
Engine1.5 diesel 76PS
Power76.1PS / 56.0kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9695018480
Software number10SW046454
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key74caa6a5edca5bd8
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW046454Offset in the file: 0x200144
Vehicle maker's hardware number9695018480Offset in the file: 0x600256
Software / calibration62S2I_P5B8B_7A3OC_9695018480Offset in the file: 0x600228
Bosch project identifier (EPK)58/1/MD1CS003/014/1396//C70/62S2I_P5B8B_7A3OC_9695018480//Offset in the file: 0x600228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9695018480 and software number 10SW046454. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
96948190802227770000Citroën Jumpy
96948191802227770000Peugeot Expert
969491348010SW075646Citroën Berlingo
96950030802227770000Peugeot Vivaro, Peugeot Expert
969501848010SW077680Citroën Berlingo
969501868010SW077676Peugeot Partner, Peugeot Berlingo, Citroën
96950186809695018680Peugeot Partner
96950430802227773333Peugeot 5008, Peugeot 3008, Peugeot Berlingo

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page