Original file

Peugeot Partner / Tepee Bosch MD1CS003 9696113980 / 10SW095063

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Peugeot Partner / Tepee, hardware number 9696113980 and software number 10SW095063, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot Partner / Tepee1.5 diesel 100PS
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9696113980
Software number
10SW095063
Software / calibration
62R2I_P5E8B_7A3OC_9696113980

Technical data

Vehicle
BrandPeugeot
Car modelPartner / Tepee
Engine1.5 diesel 100PS
Power100.0PS / 73.5kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9696113980
Software number10SW095063
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye75439eb7ed7d0e9
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW095063Offset in the file: 0x000144
Vehicle maker's hardware number9696113980Offset in the file: 0x000256
Software / calibration62R2I_P5E8B_7A3OC_9696113980Offset in the file: 0x000228
Bosch project identifier (EPK)58/1/MD1CS003/014/1396//C70/62R2I_P5E8B_7A3OC_9696113980//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9696113980 and software number 10SW095063. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
96957665802227770000Peugeot 5008
96957667802227773333Citroën Berlingo
96958321802227773333Citroën C5
96960758802227773333Peugeot 5008, Peugeot 508
96961141802227773333Citroën Berlingo, Citroën Partner, Peugeot
96961144802227773333Peugeot Partner
96961146802227773333Peugeot Rifter, Peugeot Berlingo, Citroën
96961195802227770000Citroën Berlingo, Citroën Rifter, Peugeot

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page