Original file

Citroën C3 Bosch MD1CS003 9696194280 / 10SW096092

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Citroën C3, hardware number 9696194280 and software number 10SW096092, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën C31.5 diesel 100PS
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9696194280
Software number
10SW096092
Software / calibration
62R2I_1LB8B_6A3O6_9696194280

Technical data

Vehicle
BrandCitroën
Car modelC3
Engine1.5 diesel 100PS
Power100.0PS / 73.5kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9696194280
Software number10SW096092
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key0d1098f397ee7c33
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW096092Offset in the file: 0x000144
Vehicle maker's hardware number9696194280Offset in the file: 0x000256
Software / calibration62R2I_1LB8B_6A3O6_9696194280Offset in the file: 0x000228
Bosch project identifier (EPK)58/1/MD1CS003/014/1396//C70/62R2I_1LB8B_6A3O6_9696194280//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9696194280 and software number 10SW096092. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
96961144802227773333Peugeot Partner
96961146802227773333Peugeot Rifter, Peugeot Berlingo, Citroën
96961195802227770000Citroën Berlingo, Citroën Rifter, Peugeot
96961202802227770000Citroën Berlingo
969619448010SW096502Peugeot Partner
969619458010SW096501Peugeot Partner
969619498010SW096830Peugeot Partner
96966383802227773333Peugeot 5008

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page