Original file

Peugeot Rifter Bosch MD1CS003 9697352380 / 10SW106515

An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Peugeot Rifter, hardware number 9697352380 and software number 10SW106515, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot Rifter1.5 diesel 75PS
Control unit
Bosch MD1CS003
File size
2,048.00 KB
Contents
Flash
Hardware number
9697352380
Software number
10SW106515
Software / calibration
62S2I_P2E8B_6A3OC_9697352380

Technical data

Vehicle
BrandPeugeot
Car modelRifter
Engine1.5 diesel 75PS
Power75.0PS / 55.2kW
Control unit
Control unitBosch MD1CS003
ECU makerBosch
Hardware number9697352380
Software number10SW106515
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye3b09482f1ed0415
Identification read from the file
ECU nameMD1CS003
Bosch part / software10SW106515Offset in the file: 0x000144
Vehicle maker's hardware number9697352380Offset in the file: 0x000256
Software / calibration62S2I_P2E8B_6A3OC_9697352380Offset in the file: 0x000228
Bosch project identifier (EPK)58/1/MD1CS003/014/1396//C70/62S2I_P2E8B_6A3OC_9697352380//Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9697352380 and software number 10SW106515. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS003

HardwareSoftwareVehicles
969619458010SW096501Peugeot Partner
969619498010SW096830Peugeot Partner
96966383802227773333Peugeot 5008
96968289802227770000Citroën Jumpy
969753358010SW107952Peugeot
978851272227770000Peugeot 308
978851272227773333Peugeot Partner
DPLP1396_PSA_MD1CS003_IFXD4_C48B2227770000Opel Grandland X

Bosch MD1CS003 original files

The Bosch MD1CS003 unit page