Original file
Opel Grandland X Bosch MD1CS003 DPLP1396_PSA_MD1CS003_IFXD4_C48B / 2227770000
An original (stock) flash read of the Bosch MD1CS003 control unit, fitted in Opel Grandland X, hardware number DPLP1396_PSA_MD1CS003_IFXD4_C48B and software number 2227770000, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Opel Grandland X1.5 diesel 130PS
- Control unit
- Bosch MD1CS003
- File size
- 8,192.00 KB
- Contents
- Flash
- Hardware number
- DPLP1396_PSA_MD1CS003_IFXD4_C48B
- Software number
- 2227770000
- Bosch part / software
- 10SW041437
- Vehicle maker's hardware number
- 9693721080
- Software / calibration
- P1396_PSA_MD1CS003_IFXD4_C48B
Technical data
| Brand | Opel |
|---|---|
| Car model | Grandland X |
| Engine | 1.5 diesel 130PS |
| Power | 130PS / 95.6kW |
| Control unit | Bosch MD1CS003 |
|---|---|
| ECU maker | Bosch |
| Hardware number | DPLP1396_PSA_MD1CS003_IFXD4_C48B |
| Software number | 2227770000 |
| File type | Original flash read |
|---|---|
| File size | 8,192.00 KB (8,388,608 bytes) |
| File key | 060053cb10df3c9a |
| ECU name | MD1CS003 | |
|---|---|---|
| Bosch part / software | 10SW041437 | Offset in the file: 0x01C144 |
| Vehicle maker's hardware number | 9693721080 | Offset in the file: 0x600257 |
| Software / calibration | P1396_PSA_MD1CS003_IFXD4_C48B | Offset in the file: 0x21F3A8 |
| Bosch project identifier (EPK) | 58/1/MD1CS003/1396/P1396//P1396_PSA_MD1CS003_IFXD4_C48B/// | Offset in the file: 0x21F3A8 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MD1CS003 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DPLP1396_PSA_MD1CS003_IFXD4_C48B and software number 2227770000. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MD1CS003
| Hardware | Software | Vehicles |
|---|---|---|
| 9696194580 | 10SW096501 | Peugeot Partner |
| 9696194980 | 10SW096830 | Peugeot Partner |
| 9696638380 | 2227773333 | Peugeot 5008 |
| 9696828980 | 2227770000 | Citroën Jumpy |
| 9697352380 | 10SW106515 | Peugeot Rifter |
| 9697533580 | 10SW107952 | Peugeot |
| 97885127 | 2227770000 | Peugeot 308 |
| 97885127 | 2227773333 | Peugeot Partner |