Original file

Audi Bosch MD1CS004 05L906027AP / 10SW067233

An original (stock) flash read of the Bosch MD1CS004 control unit, fitted in Audi, hardware number 05L906027AP and software number 10SW067233, 7,952.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandAudi
Control unit
Control unitBosch MD1CS004
ECU makerBosch
Hardware number05L906027AP
Software number10SW067233
File
File typeOriginal flash read
File size7,952.00 KB
File keye0d3345b3ed88e1a
Price€20

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS004 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 05L906027AP and software number 10SW067233. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Bosch MD1CS004

Bosch MD1CS004 original files

The Bosch MD1CS004 unit page