Original file

Ford Turneo Bosch MD1CS005 JV6A-14C204-AUC / 10SW049074

An original (stock) flash read of the Bosch MD1CS005 control unit, fitted in Ford Turneo, hardware number JV6A-14C204-AUC and software number 10SW049074, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Turneo1.5 diesel 120PS
Control unit
Bosch MD1CS005
File size
8,192.00 KB
Contents
Flash
Hardware number
JV6A-14C204-AUC
Software number
10SW049074
Bosch part / software
10SW029907
Vehicle maker's hardware number
KV6A-12A650-FB
Software / calibration
JV6A-12B684-TA

Technical data

Vehicle
BrandFord
Car modelTurneo
Engine1.5 diesel 120PS
Power120PS / 88.3kW
Control unit
Control unitBosch MD1CS005
ECU makerBosch
Hardware numberJV6A-14C204-AUC
Software number10SW049074
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key7d8e339e31fea9b4
Identification read from the file
ECU nameMD1CS005
Bosch part / software10SW029907Offset in the file: 0x010144
Vehicle maker's hardware numberKV6A-12A650-FBOffset in the file: 0x037030
Software / calibrationJV6A-12B684-TAOffset in the file: 0x037000
Engine descriptionJV6A-14C204-AUCOffset in the file: 0x1FFF4B
Bosch project identifier (EPK)37/1/MD1CS005/57/P1445F//P1445F400///Offset in the file: 0x0886D0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS005 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JV6A-14C204-AUC and software number 10SW049074. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS005

HardwareSoftwareVehicles
JV6A-14C204-ATA10SW029907Ford Transit 2018y MD1CS005
JV6A-14C204-ATE10SW057217Ford Transit Connect
JV6A-14C204-ATF10SW070298Ford Transit Connect
JV6A-14C204-AUAJV6A-14C204-AUAFord Tourneo Connect
JV6A-14C204-AUE10SW057218Ford Tourneo Connect 2018y MD1CS005
JV6A-14C204-AUEJV6A-12B684-TAFord Tourneo Connect 1.5 TDCI
JV6A-14C204-BGB10SW046996Ford Transit Connect
JV6A-14C204-BGD10SW051817Ford Transit Connect

Bosch MD1CS005 original files

The Bosch MD1CS005 unit page