Original file

Mercedes-Benz A180 2018y 1.5L DIESEL Bosch MD1CS006 0265490200 / 10SW040878

An original (stock) flash read of the Bosch MD1CS006 control unit, fitted in Mercedes-Benz A180 2018y 1.5L DIESEL, hardware number 0265490200 and software number 10SW040878, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A180 2018y 1.5L DIESEL1.5 85KW
Control unit
Bosch MD1CS006
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
10SW040878
Bosch part / software
10SW027491
Software / calibration
6089022000

Technical data

Vehicle
BrandMercedes-Benz
Car modelA180 2018y 1.5L DIESEL
Engine1.5 85KW
Control unit
Control unitBosch MD1CS006
ECU makerBosch
Hardware number0265490200
Software number10SW040878
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
From the file nameMercedes A180 2018y DIESEL BOSCH
File keyacd1de008ff8e3d3
Identification read from the file
ECU nameMD1CS006
Bosch part / software10SW027491Offset in the file: 0x000164
Software / calibration6089022000Offset in the file: 0x35DE77
Data set number6089033100Offset in the file: 0x59A2A7
Boot software6089040600Offset in the file: 0x01C799
Bosch project identifier (EPK)44/1/MD1CS006/1/P_1597//DA_MDG1D_3P_5035D///Offset in the file: 0x045268

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS006 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 10SW040878. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS006

HardwareSoftwareVehicles
0265490200044906Mercedes-Benz Vito
0265490200051161Mercedes-Benz A
02654902001037562372Mercedes-Benz A
026549020010SW027491Mercedes-Benz A, Mercedes-Benz A180, Mercedes-Benz A-Class
026549020010SW044906Mercedes-Benz Vito
026549020010SW051160Mercedes-Benz Class A180 1.5CDI MD1CS006
026549020010SW055613Mercedes-Benz A
02654902006089022200Mercedes-Benz

Bosch MD1CS006 original files

The Bosch MD1CS006 unit page