Original file

Mercedes-Benz Class A180 1.5CDI MD1CS006 Bosch MD1CS006 0265490200 / 10SW051160

An original (stock) flash read of the Bosch MD1CS006 control unit, fitted in Mercedes-Benz Class A180 1.5CDI MD1CS006, hardware number 0265490200 and software number 10SW051160, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Class A180 1.5CDI MD1CS0061.5 diesel 116CV
Control unit
Bosch MD1CS006
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
10SW051160
Bosch part / software
10SW027491
Software / calibration
6089022000

Technical data

Vehicle
BrandMercedes-Benz
Car modelClass A180 1.5CDI MD1CS006
Engine1.5 diesel 116CV
Control unit
Control unitBosch MD1CS006
ECU makerBosch
Hardware number0265490200
Software number10SW051160
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
From the file nameMercedes Class A180 116CV MD1CS006
File key7a4f4e86a0577d47
Identification read from the file
ECU nameMD1CS006
Bosch part / software10SW027491Offset in the file: 0x00C144
Software / calibration6089022000Offset in the file: 0x35DE77
Data set number6089034100Offset in the file: 0x59A2A7
Boot software6089040600Offset in the file: 0x01C799
Bosch project identifier (EPK)44/1/MD1CS006/1/P_1597//DA_MDG1D_3P_5035D///Offset in the file: 0x045268

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS006 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 10SW051160. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS006

HardwareSoftwareVehicles
02654902001037562372Mercedes-Benz A
026549020010SW027491Mercedes-Benz A, Mercedes-Benz A180, Mercedes-Benz A-Class
026549020010SW040878Mercedes-Benz A180 2018y 1.5L DIESEL
026549020010SW044906Mercedes-Benz Vito
026549020010SW055613Mercedes-Benz A
02654902006089022200Mercedes-Benz
028103566910SW040210Dacia Dokker
028103566910SW048507Renault Kadjar

Bosch MD1CS006 original files

The Bosch MD1CS006 unit page