Original file

Mercedes-Benz A Bosch MD1CS006 CRR2-18A-3P_6031D-177WA-85KW-CH4-EU6D-C1_DECOUP-ME182100 / 10SW039295

An original (stock) flash read of the Bosch MD1CS006 control unit, fitted in Mercedes-Benz A, hardware number CRR2-18A-3P_6031D-177WA-85KW-CH4-EU6D-C1_DECOUP-ME182100 and software number 10SW039295, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A1.5 diesel 116PS
Control unit
Bosch MD1CS006
File size
2,048.00 KB
Contents
Flash
Hardware number
CRR2-18A-3P_6031D-177WA-85KW-CH4-EU6D-C1_DECOUP-ME182100
Software number
10SW039295

Technical data

Vehicle
BrandMercedes-Benz
Car modelA
Engine1.5 diesel 116PS
Power116.0PS / 85.3kW
Control unit
Control unitBosch MD1CS006
ECU makerBosch
Hardware numberCRR2-18A-3P_6031D-177WA-85KW-CH4-EU6D-C1_DECOUP-ME182100
Software number10SW039295
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2b503ae4e72927a2
Identification read from the file
ECU nameMD1CS006
Bosch part / software10SW039295Offset in the file: 0x000144
Data set number6089032500Offset in the file: 0x19EA3B
Bosch project identifier (EPK)44/1/MD1CS006/1/P_1597//DA_MDG1D_3P_6031D///Offset in the file: 0x000330

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS006 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CRR2-18A-3P_6031D-177WA-85KW-CH4-EU6D-C1_DECOUP-ME182100 and software number 10SW039295. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS006

Bosch MD1CS006 original files

The Bosch MD1CS006 unit page