Original file

Mercedes-Benz A180d Bosch MD1CS006 CRR2-18B-3P_7051D-177WA-85KW- / 6089010600

An original (stock) flash read of the Bosch MD1CS006 control unit, fitted in Mercedes-Benz A180d, hardware number CRR2-18B-3P_7051D-177WA-85KW- and software number 6089010600, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A180d1.5 85KW
Control unit
Bosch MD1CS006
File size
8,192.00 KB
Contents
Flash
Hardware number
CRR2-18B-3P_7051D-177WA-85KW-
Software number
6089010600
Bosch part / software
10SW055613

Technical data

Vehicle
BrandMercedes-Benz
Car modelA180d
Engine1.5 85KW
FuelDiesel
Control unit
Control unitBosch MD1CS006
ECU makerBosch
Hardware numberCRR2-18B-3P_7051D-177WA-85KW-
Software number6089010600
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keycae1c9e2cd0635fb
Identification read from the file
ECU nameMD1CS006
Bosch part / software10SW055613Offset in the file: 0x400144
Data set number6089034300Offset in the file: 0x5A0931
Bosch project identifier (EPK)44/1/MD1CS006/1/P_1597//DA_MDG1D_3P_7051D///Offset in the file: 0x400330

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS006 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CRR2-18B-3P_7051D-177WA-85KW- and software number 6089010600. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz A180dFlash4,096.00 KB€20Add to cart

All reads of CRR2-18B-3P_7051D-177WA-85KW- / 6089010600

Other pairs of Bosch MD1CS006

Bosch MD1CS006 original files

The Bosch MD1CS006 unit page