Original file

Mercedes-Benz Vito Bosch MD1CS006 CRR2-19A-3X_8032D-447-ME-WM-OM622M_75KW- / 6229010700

An original (stock) flash read of the Bosch MD1CS006 control unit, fitted in Mercedes-Benz Vito, hardware number CRR2-19A-3X_8032D-447-ME-WM-OM622M_75KW- and software number 6229010700, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito1.7 diesel 75KW
Control unit
Bosch MD1CS006
File size
4,096.00 KB
Contents
Flash
Hardware number
CRR2-19A-3X_8032D-447-ME-WM-OM622M_75KW-
Software number
6229010700
Bosch part / software
10SW054483

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Engine1.7 diesel 75KW
Control unit
Control unitBosch MD1CS006
ECU makerBosch
Hardware numberCRR2-19A-3X_8032D-447-ME-WM-OM622M_75KW-
Software number6229010700
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key918d34d3ea992c60
Identification read from the file
ECU nameMD1CS006
Bosch part / software10SW054483Offset in the file: 0x000144
Data set number6229033101Offset in the file: 0x1BC481
Bosch project identifier (EPK)43/1/MD1CS006/1/P1959//DA_MDG1D_3X_8032D///Offset in the file: 0x000330

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS006 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CRR2-19A-3X_8032D-447-ME-WM-OM622M_75KW- and software number 6229010700. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz VitoFlash8,192.00 KB€20Add to cart

All reads of CRR2-19A-3X_8032D-447-ME-WM-OM622M_75KW- / 6229010700

Other pairs of Bosch MD1CS006

Bosch MD1CS006 original files

The Bosch MD1CS006 unit page