Original file

BMW X3 Bosch MDG1 O_8LUA2-00004754-054 / DST#B47D20O0-G01B47O0_AW5_AT#S15A-17-11-520-N2

An original (stock) flash read of the Bosch MDG1 control unit, fitted in BMW X3, hardware number O_8LUA2-00004754-054 and software number DST#B47D20O0-G01B47O0_AW5_AT#S15A-17-11-520-N2, 7,680.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X32.0 petrol · 190.0PS / 139.7kW
Control unit
Bosch MDG1
File size
7,680.00 KB
Contents
Flash
Hardware number
O_8LUA2-00004754-054
Software number
DST#B47D20O0-G01B47O0_AW5_AT#S15A-17-11-520-N2

Technical data

Vehicle
BrandBMW
Car modelX3
Engine2.0 petrol
FuelDiesel
Power190.0PS / 139.7kW
Control unit
Control unitBosch MDG1
ECU makerBosch
Hardware numberO_8LUA2-00004754-054
Software numberDST#B47D20O0-G01B47O0_AW5_AT#S15A-17-11-520-N2
File
File typeOriginal flash read
File size7,680.00 KB (7,864,320 bytes)
File keyb3eacfb11f7c0f6f
Identification read from the file
ECU nameMD1CS001
Data set descriptionB47D20O0-G01B47O0_AW5_AT
Bosch project identifier (EPK)38/1/MDG1_MD1CS001/11/P_1401//VLUA2///Offset in the file: 0x600210

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MDG1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_8LUA2-00004754-054 and software number DST#B47D20O0-G01B47O0_AW5_AT#S15A-17-11-520-N2. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MDG1

Bosch MDG1 original files