Original file

Bentley Bosch ME17.1.1 07V906018AA / 10SW034375

An original (stock) flash read of the Bosch ME17.1.1 control unit, fitted in Bentley, hardware number 07V906018AA and software number 10SW034375, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley
Control unit
Bosch ME17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
07V906018AA
Software number
10SW034375
Vehicle maker's hardware number
07V907018A

Technical data

Vehicle
BrandBentley
Car modelBentley
Control unit
Control unitBosch ME17.1.1
ECU makerBosch
Hardware number07V906018AA
Software number10SW034375
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd18323e5595e0e0c
Identification read from the file
ECU nameME17.1.1
Read typeOBD read (no boot area)
Bosch part / software10SW034375Offset in the file: 0x02001A
Vehicle maker's hardware number07V907018AOffset in the file: 0x3C1EB6
Software / calibration07V906018AA · version 1922Offset in the file: 0x3C1ED0
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E776
Bosch project identifier (EPK)48/1/ME17/5/S1711B01C000//S1711B01C000_NY19C2///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07V906018AA and software number 10SW034375. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.1.1

HardwareSoftwareVehicles
07V906018A1037512997Bentley Mulsanne 6.75L
07V906018AA10SW046938Bentley
07V906018AB10SW034270Bentley
07V906018AB10SW046286Bentley
07V906018AC10SW046277Bentley
07V906018B1037513989Bentley Mulsanne 6.75L
07V906018C1037522062Bentley Mulsanne 6.75L
07V906018D1037522098Bentley Mulsanne 6.75L

Bosch ME17.1.1 original files

The Bosch ME17.1.1 unit page