Original file

Bentley Mulsanne 6.75L Bosch ME17.1.1 07V906018F / 1037533671

An original (stock) flash read of the Bosch ME17.1.1 control unit, fitted in Bentley Mulsanne 6.75L, hardware number 07V906018F and software number 1037533671, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley Mulsanne 6.75L6.2 · 512.0PS / 376.6kW
Control unit
Bosch ME17.1.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
07V906018F
Software number
1037533671
Vehicle maker's hardware number
07V907018

Technical data

Vehicle
BrandBentley
Car modelBentley Mulsanne 6.75L
Engine6.2
FuelPetrol
Power512.0PS / 376.6kW
Control unit
Control unitBosch ME17.1.1
ECU makerBosch
Hardware number07V906018F
Software number1037533671
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6b51c20696462f75
Identification read from the file
ECU nameME17.1.1
Read typeFull read (boot area included)
Bosch part / software1037533671Offset in the file: 0x08001A
Vehicle maker's hardware number07V907018Offset in the file: 0x0636DC
Software / calibration07V906018F · version 1304Offset in the file: 0x0636F6
Internal build stringMED17 CB.03.09.03Offset in the file: 0x00DBF7
Bosch project identifier (EPK)53/1/MED17/5/ME17.1.1//S1711C2_6781AAR_M14K40/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07V906018F and software number 1037533671. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Bentley Mulsanne BR PERFORMANCEFlash2,048.00 KB€15Add to cart

All reads of 07V906018F / 1037533671

Other pairs of Bosch ME17.1.1

HardwareSoftwareVehicles
07V906018D1037522098Bentley Mulsanne 6.75L
07V906018E1037522099Bentley Mulsanne 6.75L
07V906018F1037526573Bentley Mulsanne 6.75L
07V906018F1037531046Bentley Mulsanne 6.75L
07V906018F1037538326Bentley Mulsanne, Bentley Mulsanne 6.75L
07V906018F1037551590Bentley Mulsanne 6.75L
07V906018G1037522365Bentley Mulsanne 6.75L
07V906018H1037526663Bentley Mulsanne 6.75L

Bosch ME17.1.1 original files

The Bosch ME17.1.1 unit page