Original file

Bentley Mulsanne Bosch ME17.1.1 07V906018F / 1037538326

An original (stock) flash read of the Bosch ME17.1.1 control unit, fitted in Bentley Mulsanne, hardware number 07V906018F and software number 1037538326, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley Mulsanne6.8 · 512.0PS / 376.6kW
Control unit
Bosch ME17.1.1
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
07V906018F
Software number
1037538326
Vehicle maker's hardware number
07V907018

Technical data

Vehicle
BrandBentley
Car modelMulsanne
Engine6.8
FuelPetrol
Power512.0PS / 376.6kW
Control unit
Control unitBosch ME17.1.1
ECU makerBosch
Hardware number07V906018F
Software number1037538326
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key42ee7fea10ad8994
Identification read from the file
ECU nameME17.1.1
Read typeCalibration only (data set)
Bosch part / software1037538326Offset in the file: 0x04001A
Vehicle maker's hardware number07V907018Offset in the file: 0x0636DC
Software / calibration07V906018F · version 1305Offset in the file: 0x0636F6
Bosch project identifier (EPK)53/1/MED17/5/ME17.1.1//S1711C2_6781AAR_M14K40/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07V906018F and software number 1037538326. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Bentley Bentley Mulsanne 6.75LFlash2,048.00 KB€15Add to cart

All reads of 07V906018F / 1037538326

Other pairs of Bosch ME17.1.1

HardwareSoftwareVehicles
07V906018E1037522099Bentley Mulsanne 6.75L
07V906018F1037526573Bentley Mulsanne 6.75L
07V906018F1037531046Bentley Mulsanne 6.75L
07V906018F1037533671Bentley Mulsanne BR PERFORMANCE, Bentley Mulsanne 6.75L
07V906018F1037551590Bentley Mulsanne 6.75L
07V906018G1037522365Bentley Mulsanne 6.75L
07V906018H1037526663Bentley Mulsanne 6.75L
07V906018H1037531176Bentley Mulsanne 6.75L

Bosch ME17.1.1 original files

The Bosch ME17.1.1 unit page