Original file

Bentley Mulsanne 6.75L Bosch ME17.1.1 07V906018H / 1037531176

An original (stock) flash read of the Bosch ME17.1.1 control unit, fitted in Bentley Mulsanne 6.75L, hardware number 07V906018H and software number 1037531176, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley Mulsanne 6.75L
Control unit
Bosch ME17.1.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
07V906018H
Software number
1037531176
Vehicle maker's hardware number
07V907018

Technical data

Vehicle
BrandBentley
Car modelBentley Mulsanne 6.75L
Control unit
Control unitBosch ME17.1.1
ECU makerBosch
Hardware number07V906018H
Software number1037531176
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key245398415a8003c3
Identification read from the file
ECU nameME17.1.1
Read typeFull read (boot area included)
Bosch part / software1037531176Offset in the file: 0x08001A
Vehicle maker's hardware number07V907018Offset in the file: 0x063554
Software / calibration07V906018H · version 1323Offset in the file: 0x06356E
Internal build stringMED17 CB.03.09.03Offset in the file: 0x00DBF7
Bosch project identifier (EPK)53/1/MED17/5/ME17.1.1//S1711C2_6781AAR_M14K30/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07V906018H and software number 1037531176. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.1.1

HardwareSoftwareVehicles
07V906018F1037538326Bentley Mulsanne, Bentley Mulsanne 6.75L
07V906018F1037551590Bentley Mulsanne 6.75L
07V906018G1037522365Bentley Mulsanne 6.75L
07V906018H1037526663Bentley Mulsanne 6.75L
07V906018H1037533831Bentley Mulsanne 6.75L
07V906018H1037538332Bentley Mulsanne 6.75L
07V906018H1037551856Bentley Mulsanne 6.75L
07V906018J1037526641Bentley Mulsanne 6.75L

Bosch ME17.1.1 original files

The Bosch ME17.1.1 unit page