Original file

Bentley Mulsanne 6.75 V8 Bosch ME17.1.1 07V907018A / 1037551173

An original (stock) flash read of the Bosch ME17.1.1 control unit, fitted in Bentley Mulsanne 6.75 V8, hardware number 07V907018A and software number 1037551173, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley Mulsanne 6.75 V8diesel
Control unit
Bosch ME17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
07V907018A
Software number
1037551173
Software / calibration
07V906018K

Technical data

Vehicle
BrandBentley
Car modelBentley Mulsanne 6.75 V8
Enginediesel
Control unit
Control unitBosch ME17.1.1
ECU makerBosch
Hardware number07V907018A
Software number1037551173
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file name6029
File key7d4dc7e470f790e0
Identification read from the file
ECU nameME17.1.1
Read typeOBD read (no boot area)
Bosch part / software1037551173Offset in the file: 0x02001A
Vehicle maker's hardware number07V907018AOffset in the file: 0x3B4570
Software / calibration07V906018K · version 1603Offset in the file: 0x3B458A
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E776
Bosch project identifier (EPK)48/1/ME17/5/S1711B01C000//S1711B01C000_NY15G2///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07V907018A and software number 1037551173. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.1.1

HardwareSoftwareVehicles
07V9070181037507810Bentley Mulsanne 6.75L
07V9070181037509111Bentley Mulsanne 6.75L
07V9070181037512943Bentley Mulsanne 6.75L
07V907018A1037540126Bentley Mulsanne
07V907018A1037551327Bentley Mulsanne 6.75 V8, Bentley Mulsanne
07V907018A1037551870Bentley Mulsanne 6.75 V8
07V907018A10SW009555Bentley Mulsanne 6.75 V8
07V907018A10SW009773Bentley Mulsanne 6.75 V8

Bosch ME17.1.1 original files

The Bosch ME17.1.1 unit page