Original file

Bentley Bosch ME17.1.1 07V907018A / 10SW046189

An original (stock) flash read of the Bosch ME17.1.1 control unit, fitted in Bentley, hardware number 07V907018A and software number 10SW046189, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BentleyCZMB
Control unit
Bosch ME17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
07V907018A
Software number
10SW046189
Software / calibration
07V906018T

Technical data

Vehicle
BrandBentley
Car modelBentley
EngineCZMB
Control unit
Control unitBosch ME17.1.1
ECU makerBosch
Hardware number07V907018A
Software number10SW046189
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye7cce34b1ff9b3cb
Identification read from the file
ECU nameME17.1.1
Read typeOBD read (no boot area)
Bosch part / software10SW046189Offset in the file: 0x02001A
Vehicle maker's hardware number07V907018AOffset in the file: 0x3C1ED6
Software / calibration07V906018T · version 7183Offset in the file: 0x3C1EF0
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E776
Bosch project identifier (EPK)48/1/ME17/5/S1711B01C000//S1711B01C000_NY19C3///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07V907018A and software number 10SW046189. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.1.1

HardwareSoftwareVehicles
07V9070181037512943Bentley Mulsanne 6.75L
07V907018A1037540126Bentley Mulsanne
07V907018A1037551173Bentley Mulsanne 6.75 V8
07V907018A1037551327Bentley Mulsanne 6.75 V8, Bentley Mulsanne
07V907018A1037551870Bentley Mulsanne 6.75 V8
07V907018A10SW009555Bentley Mulsanne 6.75 V8
07V907018A10SW009773Bentley Mulsanne 6.75 V8
07V907018A10SW010340Bentley Mulsanne 6.75 V8

Bosch ME17.1.1 original files

The Bosch ME17.1.1 unit page