Original file

Bentley Continental GT 6.0i Bosch ME17.1.6 07C906023AD / 1037545372

An original (stock) flash read of the Bosch ME17.1.6 control unit, fitted in Bentley Continental GT 6.0i, hardware number 07C906023AD and software number 1037545372, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley Continental GT 6.0i6.0
Control unit
Bosch ME17.1.6
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
07C906023AD
Software number
1037545372
Vehicle maker's hardware number
07C907309

Technical data

Vehicle
BrandBentley
Car modelBentley Continental GT 6.0i
Engine6.0
Control unit
Control unitBosch ME17.1.6
ECU makerBosch
Hardware number07C906023AD
Software number1037545372
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9222a1408c188eb0
Identification read from the file
ECU nameMED17.1.6
Read typeOBD read (no boot area)
Bosch part / software1037545372Offset in the file: 0x02001A
Vehicle maker's hardware number07C907309Offset in the file: 0x3BC3E6
Software / calibration07C906023AD · version 0302Offset in the file: 0x3BC400
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E8D6
Bosch project identifier (EPK)49/1/MED17/3/D171633//S1716B10C000_NY15B1/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.1.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07C906023AD and software number 1037545372. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.1.6

HardwareSoftwareVehicles
07C906023A1037539292Bentley Continental GT 6.0i
07C906023AA1037545367Bentley Continental GT 6.0i
07C906023AB1037545745Bentley Continental GT 6.0i
07C906023AC1037545379Bentley
07C906023AE1037545414Bentley Continental GT 6.0i
07C906023AF1037545476Bentley Continental, Bentley Continental GT 6.0i
07C906023AG1037545552Bentley Continental GT 6.0i
07C906023AH1037545889Bentley Continental GT 6.0i

Bosch ME17.1.6 original files

The Bosch ME17.1.6 unit page