Original file

Bentley Bosch ME17.1.6 07C906023CD / 10SW007113

An original (stock) flash read of the Bosch ME17.1.6 control unit, fitted in Bentley, hardware number 07C906023CD and software number 10SW007113, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley6.0
Control unit
Bosch ME17.1.6
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
07C906023CD
Software number
10SW007113
Vehicle maker's hardware number
07C907309

Technical data

Vehicle
BrandBentley
Car modelBentley
Engine6.0
Control unit
Control unitBosch ME17.1.6
ECU makerBosch
Hardware number07C906023CD
Software number10SW007113
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key806ac0e2ebd913ce
Identification read from the file
ECU nameMED17.1.6
Read typeOBD read (no boot area)
Bosch part / software10SW007113Offset in the file: 0x02001A
Vehicle maker's hardware number07C907309Offset in the file: 0x3BFA2E
Software / calibration07C906023CD · version 1584Offset in the file: 0x3BFA48
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E8D6
Bosch project identifier (EPK)49/1/MED17/3/D171633//S1716B16C000_NY16D0/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.1.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07C906023CD and software number 10SW007113. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.1.6

HardwareSoftwareVehicles
07C906023BM10SW003350Bentley Continental GT 6.0i
07C906023BN10SW004969Bentley Continental GT 6.0i
07C906023BP10SW004155Bentley Continental GT 6.0i
07C906023CC10SW006920Bentley Continental GT 6.0i
07C906023CE10SW006810Bentley
07C906023CF10SW023532Bentley Continental GT 6.0i
07C906023CF10SW026998Bentley
07C906023CG10SW023586Bentley

Bosch ME17.1.6 original files

The Bosch ME17.1.6 unit page