Original file

Fiat Viaggio Bosch ME17.3.0 0261S07829 / 1037551050

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat Viaggio, hardware number 0261S07829 and software number 1037551050, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Viaggio1.4 petrol 150PS
Control unit
Bosch ME17.3.0
Read type
Full read (boot area included)
File
1,536.00 KB · Flash
Hardware number
0261S07829
Software number
1037551050
Vehicle maker's hardware number
55259456
Software / calibration
17300105D7

Technical data

Vehicle
BrandFiat
Car modelViaggio
Engine1.4 petrol 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S07829
Software number1037551050
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key6e006ed4d482eba4
Identification read from the file
ECU nameME17.3.0
Read typeFull read (boot area included)
ProcessorTC1724
Bosch part / software0261S07829 / 1037551050Offset in the file: 0x03C35E / 0x04001A
Vehicle maker's hardware number55259456Offset in the file: 0x03C379
Software / calibration17300105D7Offset in the file: 0x03FF08
Internal build string11B.08.02.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)34/1/MED17/9/ME1730//17300105D7///Offset in the file: 0x03FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S07829 and software number 1037551050. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
10SW071916Abarth 595
10SW072069Abarth 500 / 595 / 695
0261S07817529104Fiat 500
0261S078291037531187Fiat Ottimo
0261S082481037551051Fiat Ottimo
0261S082491037531186Fiat Viaggio, Fiat 500 Abarth
0261S082491037537425Fiat Viaggio
0261S082491037551049Fiat Ottimo

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page