Original file

Fiat 500 Bosch ME17.3.0 0261S09298 / 1037545631

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat 500, hardware number 0261S09298 and software number 1037545631, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 5001.4 · 136PS / 100.0kW
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S09298
Software number
1037545631
Vehicle maker's hardware number
55262139
Software / calibration
173072105A2

Technical data

Vehicle
BrandFiat
Car model500
Engine1.4
FuelPetrol
Power136PS / 100.0kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S09298
Software number1037545631
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keydf1f7e11943b205a
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software1037545631Offset in the file: 0x08001A
Vehicle maker's hardware number55262139Offset in the file: 0x062655
Software / calibration173072105A2Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173072105A2///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S09298 and software number 1037545631. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Fiat 500Flash1,536.00 KB€15Add to cart
Abarth 500 / 595 / 695Flash1,536.00 KB€15Add to cart
Fiat 500Flash1,536.00 KB€15Add to cart

All reads of 0261S09298 / 1037545631

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S082491037551049Fiat Ottimo
0261S08249551049Fiat Viaggio
0261S09298005388Fiat 500
0261S092981037540731Fiat 500 Abarth
0261S09298554107Fiat 500
0261S092991037540741Fiat 500 / 595 / 695, Fiat 500, Fiat 595 Competizione
0261S092991037545634Fiat 500, Fiat 500 / 595 / 695, Fiat 500 Abarth
0261S092991037554104Fiat 500

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page