Original file

Abarth 500 / 595 / 695 Bosch ME17.3.0 0261S09299 / 1037545634

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Abarth 500 / 595 / 695, hardware number 0261S09299 and software number 1037545634, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Abarth 500 / 595 / 6951.4 petrol 160PS
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S09299
Software number
1037545634
Vehicle maker's hardware number
55262141
Software / calibration
173072105A2

Technical data

Vehicle
BrandAbarth
Car model500 / 595 / 695
Engine1.4 petrol 160PS
Power160.0PS / 117.7kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S09299
Software number1037545634
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File keye4974ca4b03b4d50
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software1037545634Offset in the file: 0x08001A
Vehicle maker's hardware number55262141Offset in the file: 0x062655
Software / calibration173072105A2Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173072105A2///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S09299 and software number 1037545634. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Fiat 500Flash2,048.00 KB€15Add to cart
Fiat 595 AbarthFlash2,048.00 KB€15Add to cart
Fiat 500Flash1,536.00 KB€15Add to cart
Fiat 500 AbarthFlash1,536.00 KB€15Add to cart
Abarth 500 / 595 / 695Flash1,536.00 KB€15Add to cart
Fiat 500Flash1,536.00 KB€15Add to cart
Fiat Punto NuovaFlash1,536.00 KB€15Add to cart
Fiat 500 AbarthFlash1,536.00 KB€15Add to cart
Fiat 500Flash1,536.00 KB€15Add to cart
Fiat 500 / 595 / 695Flash2,048.00 KB€15Add to cart

All reads of 0261S09299 / 1037545634

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S092981037540731Fiat 500 Abarth
0261S092981037545631Fiat 500, Fiat 500 / 595 / 695, Abarth
0261S09298554107Fiat 500
0261S092991037540741Fiat 500 / 595 / 695, Fiat 500, Fiat 595 Competizione
0261S092991037554104Fiat 500
0261S0929910SW005385Fiat 595 Abarth, Fiat 595 Abarth Pista
0261S093061037545380Fiat Doblo
0261S093101037538083Alfa Romeo Giulietta, Alfa Romeo Adam, Opel

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page