Original file

Fiat 500L Bosch ME17.3.0 0261S09313 / 030712

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat 500L, hardware number 0261S09313 and software number 030712, 1,600.02 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 500L
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,600.02 KB · Flash
Hardware number
0261S09313
Software number
030712
Bosch part / software
10SW030712
Vehicle maker's hardware number
46344294
Software / calibration
1730E3104A1

Technical data

Vehicle
BrandFiat
Car model500L
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S09313
Software number030712
File
File typeOriginal flash read
File size1,600.02 KB (1,638,416 bytes)
From the file nameFiat SW version HW 500L
File key93715a6d07a6e1b1
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software0261S09313 / 10SW030712Offset in the file: 0x05ECCA / 0x08001A
Vehicle maker's hardware number46344294Offset in the file: 0x05ECE5
Software / calibration1730E3104A1Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//1730E3104A1///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S09313 and software number 030712. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S093101037538083Alfa Romeo Giulietta, Alfa Romeo Adam, Opel
0261S093101037541565Alfa Romeo Giulietta
0261S093101037545715Alfa Romeo Giulietta
0261S0931010SW011033Alfa Romeo Giulietta, Alfa Romeo Giulietta ZIPTUNING
0261S0931310SW012218Fiat 500
0261S09313545590Fiat 500L
0261S093141037548642Fiat 500X, Fiat Combo, Opel
0261S09314548642Fiat Doblo

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page