Original file

Fiat 500 Bosch ME17.3.0 0261S09313 / 10SW012218

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat 500, hardware number 0261S09313 and software number 10SW012218, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 5001.4 95PS
Control unit
Bosch ME17.3.0
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0261S09313
Software number
10SW012218
Vehicle maker's hardware number
55279465
Software / calibration
173071105E1

Technical data

Vehicle
BrandFiat
Car model500
Engine1.4 95PS
FuelPetrol
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S09313
Software number10SW012218
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2ed6812fd0785af6
Identification read from the file
ECU nameME17.3.0
Read typeCalibration only (data set)
Bosch part / software0261S09313 / 10SW012218Offset in the file: 0x058F82 / 0x04001A
Vehicle maker's hardware number55279465Offset in the file: 0x058F9D
Software / calibration173071105E1Offset in the file: 0x07FF08
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173071105E1///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S09313 and software number 10SW012218. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S093101037541565Alfa Romeo Giulietta
0261S093101037545715Alfa Romeo Giulietta
0261S0931010SW011033Alfa Romeo Giulietta, Alfa Romeo Giulietta ZIPTUNING
0261S09313030712Fiat 500L
0261S09313545590Fiat 500L
0261S093141037548642Fiat 500X, Fiat Combo, Opel
0261S09314548642Fiat Doblo
0261S09348549987Fiat Doblo

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page