Original file

Alfa Romeo Giulietta Bosch ME17.3.0 0261S09350 / 10SW011036

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Alfa Romeo Giulietta, hardware number 0261S09350 and software number 10SW011036, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Alfa Romeo Giulietta1.4 petrol 120PS
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S09350
Software number
10SW011036
Vehicle maker's hardware number
55275944
Software / calibration
173074106B0

Technical data

Vehicle
BrandAlfa Romeo
Car modelGiulietta
Engine1.4 petrol 120PS
Power120.0PS / 88.3kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S09350
Software number10SW011036
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key66bcec1453693490
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software0261S09350 / 10SW011036Offset in the file: 0x06583E / 0x08001A
Vehicle maker's hardware number55275944Offset in the file: 0x065859
Software / calibration173074106B0Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173074106B0///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S09350 and software number 10SW011036. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Alfa Romeo GiuliettaFlash1,536.00 KB€15Add to cart

All reads of 0261S09350 / 10SW011036

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S09348549987Fiat Doblo
0261S093501037541819Alfa Romeo Giulietta
0261S093501037543752Alfa Romeo Giulietta
0261S093501037552428Alfa Romeo Giulietta
0261S093511037544966Alfa Romeo Mito
0261S095211037537186Fiat Viaggio
0261S09685018401Fiat Ottimo
0261S097531037552429Fiat 500

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page