Original file

Fiat Ottimo Bosch ME17.3.0 0261S09685 / 018401

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat Ottimo, hardware number 0261S09685 and software number 018401, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Ottimo
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S09685
Software number
018401
Bosch part / software
10SW018401
Vehicle maker's hardware number
55279475
Software / calibration
173070709D0

Technical data

Vehicle
BrandFiat
Car modelOttimo
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S09685
Software number018401
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
From the file nameFiat SW version HW Ottimo
File key57140ee71ab9f528
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software0261S09685 / 10SW018401Offset in the file: 0x05DADE / 0x08001A
Vehicle maker's hardware number55279475Offset in the file: 0x05DAF9
Software / calibration173070709D0Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173070709D0///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S09685 and software number 018401. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S093501037552428Alfa Romeo Giulietta
0261S0935010SW011036Alfa Romeo Giulietta
0261S093511037544966Alfa Romeo Mito
0261S095211037537186Fiat Viaggio
0261S097531037552429Fiat 500
0261S097821037540142Alfa Romeo Giulietta
0261S097821037541574Alfa Romeo Giulietta
0261S097821037545716Alfa Romeo Giulietta

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page