Original file

Fiat 500 Bosch ME17.3.0 0261S09753 / 1037552429

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat 500, hardware number 0261S09753 and software number 1037552429, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 5001.4 · 120.0PS / 88.3kW
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S09753
Software number
1037552429
Vehicle maker's hardware number
55268772
Software / calibration
173074106B0

Technical data

Vehicle
BrandFiat
Car model500
Engine1.4
FuelPetrol
Power120.0PS / 88.3kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S09753
Software number1037552429
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key2bc6f013c4d13d2d
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software0261S09753 / 1037552429Offset in the file: 0x06583E / 0x08001A
Vehicle maker's hardware number55268772Offset in the file: 0x065859
Software / calibration173074106B0Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173074106B0///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S09753 and software number 1037552429. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S0935010SW011036Alfa Romeo Giulietta
0261S093511037544966Alfa Romeo Mito
0261S095211037537186Fiat Viaggio
0261S09685018401Fiat Ottimo
0261S097821037540142Alfa Romeo Giulietta
0261S097821037541574Alfa Romeo Giulietta
0261S097821037545716Alfa Romeo Giulietta
0261S098081037540215Fiat 500, Fiat 500/595/695

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page