Original file

Fiat 595 Abarth Biposto Bosch ME17.3.0 0261S11856 / 552521

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat 595 Abarth Biposto, hardware number 0261S11856 and software number 552521, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 595 Abarth Biposto
Control unit
Bosch ME17.3.0
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0261S11856
Software number
552521
Bosch part / software
1037552521
Vehicle maker's hardware number
55268777
Software / calibration
173072105A2

Technical data

Vehicle
BrandFiat
Car model595 Abarth Biposto
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S11856
Software number552521
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameFiat SW version HW 595
File key6dc3637da747cee3
Identification read from the file
ECU nameME17.3.0
Read typeCalibration only (data set)
Bosch part / software1037552521Offset in the file: 0x04001A
Vehicle maker's hardware number55268777Offset in the file: 0x062655
Software / calibration173072105A2Offset in the file: 0x07FF08
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173072105A2///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S11856 and software number 552521. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S106321037540965Fiat 500, Fiat 500 / 595 / 695, Fiat 595 Abarth
0261S106321037554103Fiat 595 Abarth, Fiat 500, Fiat 595C Turismo
0261S1063210SW005384Fiat 500 Abarth
0261S118561037553965Fiat 500 / 595 / 695
0261S118571037552522Fiat 500 / 595 / 695
0261S11857552697Fiat 500
0261S118581037553899Abarth 595 Competizione, Abarth 595 Abarth Competizione, Abarth 500 / 595 / 695
0261S118581037554107Fiat 500 / 595 / 695

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page