Original file

Fiat 500 Bosch ME17.3.0 0261S11857 / 552697

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat 500, hardware number 0261S11857 and software number 552697, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 500
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S11857
Software number
552697
Bosch part / software
1037552697
Vehicle maker's hardware number
55268774
Software / calibration
173072105A2

Technical data

Vehicle
BrandFiat
Car model500
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S11857
Software number552697
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
From the file nameFiat SW version HW 500
File key4fd9f7d49c1223dc
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
Bosch part / software1037552697Offset in the file: 0x02001A
Vehicle maker's hardware number55268774Offset in the file: 0x062655
Software / calibration173072105A2Offset in the file: 0x07FF08
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173072105A2///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S11857 and software number 552697. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S1063210SW005384Fiat 500 Abarth
0261S118561037553965Fiat 500 / 595 / 695
0261S11856552521Fiat 595 Abarth Biposto
0261S118571037552522Fiat 500 / 595 / 695
0261S118581037553899Abarth 595 Competizione, Abarth 595 Abarth Competizione, Abarth 500 / 595 / 695
0261S118581037554107Fiat 500 / 595 / 695
0261S11859004734Fiat 500
0261S118591037555924Fiat 500, Fiat 500 Abarth, Fiat Abarth

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page