Original file

Abarth 595 Competizione Bosch ME17.3.0 0261S11858 / 1037553899

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Abarth 595 Competizione, hardware number 0261S11858 and software number 1037553899, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Abarth 595 Competizione1.4 · 180.0PS / 132.4kW
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S11858
Software number
1037553899
Vehicle maker's hardware number
55269842
Software / calibration
173072105B0

Technical data

Vehicle
BrandAbarth
Car model595 Competizione
Engine1.4
FuelPetrol
Power180.0PS / 132.4kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S11858
Software number1037553899
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
From the file name1959
File keyf2aacbf69c4cc738
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software1037553899Offset in the file: 0x08001A
Vehicle maker's hardware number55269842Offset in the file: 0x0626C9
Software / calibration173072105B0Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173072105B0///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S11858 and software number 1037553899. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Fiat 595 Abarth CompetizioneFlash1,536.00 KB€15Add to cart
Abarth 500 / 595 / 695Flash2,048.00 KB€15Add to cart
Fiat 595 CompetizioneFlash1,536.00 KB€15Add to cart

All reads of 0261S11858 / 1037553899

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S118561037553965Fiat 500 / 595 / 695
0261S11856552521Fiat 595 Abarth Biposto
0261S118571037552522Fiat 500 / 595 / 695
0261S11857552697Fiat 500
0261S118581037554107Fiat 500 / 595 / 695
0261S11859004734Fiat 500
0261S118591037555924Fiat 500, Fiat 500 Abarth, Fiat Abarth
0261S1185910SW004733Fiat 595

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page