Original file

Fiat 500 Bosch ME17.3.0 0261S11859 / 004734

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat 500, hardware number 0261S11859 and software number 004734, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 5001.4 diesel · 180.0PS / 132.4kW
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S11859
Software number
004734
Bosch part / software
10SW004734
Vehicle maker's hardware number
55274451
Software / calibration
173072105B0

Technical data

Vehicle
BrandFiat
Car model500
Engine1.4 diesel
Power180.0PS / 132.4kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S11859
Software number004734
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya4c91ef232501565
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software10SW004734Offset in the file: 0x08001A
Vehicle maker's hardware number55274451Offset in the file: 0x0626C9
Software / calibration173072105B0Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173072105B0///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S11859 and software number 004734. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S118571037552522Fiat 500 / 595 / 695
0261S11857552697Fiat 500
0261S118581037553899Abarth 595 Competizione, Abarth 595 Abarth Competizione, Abarth 500 / 595 / 695
0261S118581037554107Fiat 500 / 595 / 695
0261S118591037555924Fiat 500, Fiat 500 Abarth, Fiat Abarth
0261S1185910SW004733Fiat 595
0261S1185910SW004734Fiat 500, Fiat 500 / 595 / 695, Fiat 595 Abarth
0261S123511037550730Fiat Viaggio, Fiat Viago

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page