Original file

Fiat Tipo Bosch ME17.3.0 0261S12801 / 004594

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat Tipo, hardware number 0261S12801 and software number 004594, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Tipo
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S12801
Software number
004594
Bosch part / software
10SW004594
Vehicle maker's hardware number
55268853
Software / calibration
1730S3903B3

Technical data

Vehicle
BrandFiat
Car modelTipo
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S12801
Software number004594
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameFiat SW version HW Tipo
File key4180cdf485b6d3e0
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software0261S12801 / 10SW004594Offset in the file: 0x062512 / 0x08001A
Vehicle maker's hardware number55268853Offset in the file: 0x06252D
Software / calibration1730S3903B3Offset in the file: 0x07FF08
Internal build string11B.14.00.00RBOffset in the file: 0x00E5A8
Bosch project identifier (EPK)35/1/MED17/9/ME1730//1730S3903B3///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S12801 and software number 004594. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S1185910SW004733Fiat 595
0261S1185910SW004734Fiat 500, Fiat 500 / 595 / 695, Fiat 595 Abarth
0261S123511037550730Fiat Viaggio, Fiat Viago
0261S123521037550731Fiat Ottimo
0261S12801038415Fiat Tipo
0261S1280110SW008953Fiat Tipo, Fiat Tipo/Egea
0261S1280110SW012318Fiat Tipo, Fiat Tipo 2018y 1.4L
0261S1280110SW023433Fiat Tipo

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page