Original file

Fiat Tipo Bosch ME17.3.0 0261S12801 / 10SW023433

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat Tipo, hardware number 0261S12801 and software number 10SW023433, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Tipo1.4 95PS
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S12801
Software number
10SW023433
Vehicle maker's hardware number
55268853
Software / calibration
1730S3805B3

Technical data

Vehicle
BrandFiat
Car modelTipo
Engine1.4 95PS
FuelPetrol
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S12801
Software number10SW023433
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File keya41239bc7a778df3
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
Bosch part / software0261S12801 / 10SW023433Offset in the file: 0x063362 / 0x02001A
Vehicle maker's hardware number55268853Offset in the file: 0x06337D
Software / calibration1730S3805B3Offset in the file: 0x07FF08
Bosch project identifier (EPK)35/1/MED17/9/ME1730//1730S3805B3///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S12801 and software number 10SW023433. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Fiat TipoFlash2,048.00 KB€15Add to cart
Fiat TipoFlash1,536.00 KB€15Add to cart

All reads of 0261S12801 / 10SW023433

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S12801004594Fiat Tipo
0261S12801038415Fiat Tipo
0261S1280110SW008953Fiat Tipo, Fiat Tipo/Egea
0261S1280110SW012318Fiat Tipo, Fiat Tipo 2018y 1.4L
0261S1280110SW038415Fiat Tipo
0261S13701007372Fiat 5
0261S1370101101Fiat Tipo
0261S1370110SW007372Fiat Tipo

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page